Changes in uspace/lib/usbdev/src/hub.c [fb422312:7711296] in mainline

File:

• uspace/lib/usbdev/src/hub.c (modified) (15 diffs)

uspace/lib/usbdev/src/hub.c

@@ -66 +66 @@
  *
  * @param connection Opened connection to host controller.
+ * @param preferred Preferred SUB address.
+ * @param strict Fail if the preferred address is not avialable.
  * @param speed Speed of the new device (device that will be assigned
  *    the returned address).
@@ -71 +73 @@
  */
 usb_address_t usb_hc_request_address(usb_hc_connection_t *connection,
-    usb_speed_t speed)
+    usb_address_t preferred, bool strict, usb_speed_t speed)
 {
         CHECK_CONNECTION(connection);
-        
+
         async_exch_t *exch = async_exchange_begin(connection->hc_sess);
-        
-        sysarg_t address;
-        int rc = async_req_2_1(exch, DEV_IFACE_ID(USBHC_DEV_IFACE),
-            IPC_M_USBHC_REQUEST_ADDRESS, speed,
-            &address);
-        
+        if (!exch)
+                return (usb_address_t)ENOMEM;
+
+        usb_address_t address = preferred;
+        const int ret = usbhc_request_address(exch, &address, strict, speed);
+
         async_exchange_end(exch);
-        
-        if (rc != EOK)
-                return (usb_address_t) rc;
-        
-        return (usb_address_t) address;
+        return ret == EOK ? address : ret;
 }
 
@@ -96 +94 @@
  * @return Error code.
  */
-int usb_hc_register_device(usb_hc_connection_t * connection,
+int usb_hc_register_device(usb_hc_connection_t *connection,
     const usb_hub_attached_device_t *attached_device)
 {
         CHECK_CONNECTION(connection);
-        
-        if (attached_device == NULL)
-                return EBADMEM;
-        
+        if (attached_device == NULL || attached_device->fun == NULL)
+                return EINVAL;
+
         async_exch_t *exch = async_exchange_begin(connection->hc_sess);
-        int rc = async_req_3_0(exch, DEV_IFACE_ID(USBHC_DEV_IFACE),
-            IPC_M_USBHC_BIND_ADDRESS,
+        if (!exch)
+                return ENOMEM;
+        const int ret = usbhc_bind_address(exch,
             attached_device->address, attached_device->fun->handle);
         async_exchange_end(exch);
-        
-        return rc;
+
+        return ret;
 }
 
@@ -123 +121 @@
 {
         CHECK_CONNECTION(connection);
-        
+
         async_exch_t *exch = async_exchange_begin(connection->hc_sess);
-        int rc = async_req_2_0(exch, DEV_IFACE_ID(USBHC_DEV_IFACE),
-            IPC_M_USBHC_RELEASE_ADDRESS, address);
+        if (!exch)
+                return ENOMEM;
+        const int ret = usbhc_release_address(exch, address);
         async_exchange_end(exch);
-        
-        return rc;
+
+        return ret;
 }
 
-
-static void unregister_control_endpoint_on_default_address(
-    usb_hc_connection_t *connection)
+/** Change address of connected device.
+ * This function automatically updates the backing connection to point to
+ * the new address. It also unregisterrs the old endpoint and registers
+ * a new one.
+ * This creates whole bunch of problems:
+ *  1. All pipes using this wire are broken because they are not
+ *     registered for new address
+ *  2. All other pipes for this device are using wrong address,
+ *     possibly targeting completely different device
+ *
+ * @param pipe Control endpoint pipe (session must be already started).
+ * @param new_address New USB address to be set (in native endianness).
+ * @return Error code.
+ */
+static int usb_request_set_address(usb_pipe_t *pipe, usb_address_t new_address,
+    usb_hc_connection_t *hc_conn)
 {
-        usb_device_connection_t dev_conn;
-        int rc = usb_device_connection_initialize_on_default_address(&dev_conn,
-            connection);
-        if (rc != EOK) {
-                return;
-        }
-
-        usb_pipe_t ctrl_pipe;
-        rc = usb_pipe_initialize_default_control(&ctrl_pipe, &dev_conn);
-        if (rc != EOK) {
-                return;
-        }
-
-        usb_pipe_unregister(&ctrl_pipe, connection);
+        if ((new_address < 0) || (new_address >= USB11_ADDRESS_MAX)) {
+                return EINVAL;
+        }
+        assert(pipe);
+        assert(hc_conn);
+        assert(pipe->wire != NULL);
+
+        const uint16_t addr = uint16_host2usb((uint16_t)new_address);
+
+        int rc = usb_control_request_set(pipe,
+            USB_REQUEST_TYPE_STANDARD, USB_REQUEST_RECIPIENT_DEVICE,
+            USB_DEVREQ_SET_ADDRESS, addr, 0, NULL, 0);
+
+        if (rc != EOK) {
+                return rc;
+        }
+
+        /* TODO: prevent others from accessing the wire now. */
+        if (usb_pipe_unregister(pipe, hc_conn) != EOK) {
+                usb_log_warning(
+                    "Failed to unregister the old pipe on address change.\n");
+        }
+        /* The address is already changed so set it in the wire */
+        pipe->wire->address = new_address;
+        rc = usb_pipe_register(pipe, 0, hc_conn);
+        if (rc != EOK)
+                return EADDRNOTAVAIL;
+
+        return EOK;
 }
 
@@ -171 +198 @@
  *
  * @param[in] parent Parent device (i.e. the hub device).
- * @param[in] connection Connection to host controller.
+ * @param[in] connection Connection to host controller. Must be non-null.
  * @param[in] dev_speed New device speed.
  * @param[in] enable_port Function for enabling signaling through the port the
@@ -177 +204 @@
  * @param[in] arg Any data argument to @p enable_port.
  * @param[out] assigned_address USB address of the device.
- * @param[in] dev_ops Child device ops.
+ * @param[in] dev_ops Child device ops. Will use default if not provided.
  * @param[in] new_dev_data Arbitrary pointer to be stored in the child
- *      as @c driver_data.
+ *      as @c driver_data. Will allocate and assign usb_hub_attached_device_t
+ *      structure if NULL.
  * @param[out] new_fun Storage where pointer to allocated child function
- *      will be written.
+ *      will be written. Must be non-null.
  * @return Error code.
+ * @retval EINVAL Either connection or new_fun is a NULL pointer.
  * @retval ENOENT Connection to HC not opened.
  * @retval EADDRNOTAVAIL Failed retrieving free address from host controller.
@@ -190 +219 @@
  *      request or requests for descriptors when creating match ids).
  */
-int usb_hc_new_device_wrapper(ddf_dev_t *parent, usb_hc_connection_t *connection,
-    usb_speed_t dev_speed,
+int usb_hc_new_device_wrapper(ddf_dev_t *parent,
+    usb_hc_connection_t *connection, usb_speed_t dev_speed,
     int (*enable_port)(void *arg), void *arg, usb_address_t *assigned_address,
     ddf_dev_ops_t *dev_ops, void *new_dev_data, ddf_fun_t **new_fun)
 {
-        assert(connection != NULL);
-        // FIXME: this is awful, we are accessing directly the structure.
-        usb_hc_connection_t hc_conn = {
-                .hc_handle = connection->hc_handle,
-                .hc_sess = NULL
-        };
+        if (new_fun == NULL || connection == NULL)
+                return EINVAL;
+
+        // TODO: Why not use provided connection?
+        usb_hc_connection_t hc_conn;
+        usb_hc_connection_initialize(&hc_conn, connection->hc_handle);
 
         int rc;
@@ -214 +243 @@
                 return rc;
         }
-
 
         /*
          * Request new address.
          */
-        usb_address_t dev_addr = usb_hc_request_address(&hc_conn, dev_speed);
+        usb_address_t dev_addr =
+            usb_hc_request_address(&hc_conn, 0, false, dev_speed);
         if (dev_addr < 0) {
                 rc = EADDRNOTAVAIL;
@@ -240 +269 @@
 
         usb_pipe_t ctrl_pipe;
-        rc = usb_pipe_initialize_default_control(&ctrl_pipe,
-            &dev_conn);
+        rc = usb_pipe_initialize_default_control(&ctrl_pipe, &dev_conn);
         if (rc != EOK) {
                 rc = ENOTCONN;
@@ -248 +276 @@
 
         do {
-                rc = usb_pipe_register_with_speed(&ctrl_pipe, dev_speed, 0,
-                    &hc_conn);
-                if (rc != EOK) {
+                rc = usb_hc_request_address(&hc_conn, USB_ADDRESS_DEFAULT,
+                    true, dev_speed);
+                if (rc == ENOENT) {
                         /* Do not overheat the CPU ;-). */
                         async_usleep(ENDPOINT_0_0_REGISTER_ATTEMPT_DELAY_USEC);
                 }
-        } while (rc != EOK);
+        } while (rc == ENOENT);
+        if (rc < 0) {
+                goto leave_release_free_address;
+        }
+
+        /* Register control pipe on default address. */
+        rc = usb_pipe_register(&ctrl_pipe, 0, &hc_conn);
+        if (rc != EOK) {
+                rc = ENOTCONN;
+                goto leave_release_default_address;
+        }
+
         struct timeval end_time;
 
@@ -267 +306 @@
          * above might use much of this time so we should only wait to fill
          * up the 100ms quota*/
-        suseconds_t elapsed = tv_sub(&end_time, &start_time);
+        const suseconds_t elapsed = tv_sub(&end_time, &start_time);
         if (elapsed < 100000) {
                 async_usleep(100000 - elapsed);
         }
 
-        /*
-         * Endpoint is registered. We can enable the port and change
-         * device address.
-         */
+        /* Endpoint is registered. We can enable the port and change address. */
         rc = enable_port(arg);
         if (rc != EOK) {
@@ -287 +323 @@
         async_usleep(10000);
 
+        /* Get max_packet_size value. */
         rc = usb_pipe_probe_default_control(&ctrl_pipe);
         if (rc != EOK) {
@@ -293 +330 @@
         }
 
-        rc = usb_request_set_address(&ctrl_pipe, dev_addr);
+        rc = usb_request_set_address(&ctrl_pipe, dev_addr, &hc_conn);
         if (rc != EOK) {
                 rc = ESTALL;
@@ -299 +336 @@
         }
 
-        /*
-         * Address changed. We can release the original endpoint, thus
-         * allowing other to access the default address.
-         */
-        unregister_control_endpoint_on_default_address(&hc_conn);
-
-        /*
-         * Time to register the new endpoint.
-         */
-        rc = usb_pipe_register(&ctrl_pipe, 0, &hc_conn);
-        if (rc != EOK) {
-                goto leave_release_free_address;
-        }
-
-        /*
-         * It is time to register the device with devman.
-         */
+        /* Address changed. We can release the default, thus
+         * allowing other to access the default address. */
+        usb_hc_unregister_device(&hc_conn, USB_ADDRESS_DEFAULT);
+
+        /* Register the device with devman. */
         /* FIXME: create device_register that will get opened ctrl pipe. */
         ddf_fun_t *child_fun;
-        rc = usb_device_register_child_in_devman(dev_addr, dev_conn.hc_handle,
+        rc = usb_device_register_child_in_devman(&ctrl_pipe,
             parent, dev_ops, new_dev_data, &child_fun);
         if (rc != EOK) {
-                rc = ESTALL;
                 goto leave_release_free_address;
         }
 
-        /*
-         * And now inform the host controller about the handle.
-         */
-        usb_hub_attached_device_t new_device = {
+        const usb_hub_attached_device_t new_device = {
                 .address = dev_addr,
                 .fun = child_fun,
         };
+
+
+        /* Inform the host controller about the handle. */
         rc = usb_hc_register_device(&hc_conn, &new_device);
         if (rc != EOK) {
+                /* We know nothing about that data. */
+                if (new_dev_data)
+                        child_fun->driver_data = NULL;
+                /* The child function is already created. */
+                ddf_fun_destroy(child_fun);
                 rc = EDESTADDRREQ;
                 goto leave_release_free_address;
         }
 
-
-        /*
-         * And we are done.
-         */
         if (assigned_address != NULL) {
                 *assigned_address = dev_addr;
         }
-        if (new_fun != NULL) {
-                *new_fun = child_fun;
-        }
+
+        *new_fun = child_fun;
 
         rc = EOK;
@@ -357 +381 @@
          */
 leave_release_default_address:
-        usb_pipe_unregister(&ctrl_pipe, &hc_conn);
+        usb_hc_unregister_device(&hc_conn, USB_ADDRESS_DEFAULT);
 
 leave_release_free_address:
-        usb_hc_unregister_device(&hc_conn, dev_addr);
+        /* This might be either 0:0 or dev_addr:0 */
+        if (usb_pipe_unregister(&ctrl_pipe, &hc_conn) != EOK)
+                usb_log_warning("%s: Failed to unregister default pipe.\n",
+                    __FUNCTION__);
+
+        if (usb_hc_unregister_device(&hc_conn, dev_addr) != EOK)
+                usb_log_warning("%s: Failed to unregister device.\n",
+                    __FUNCTION__);
 
 close_connection:
         if (usb_hc_connection_close(&hc_conn) != EOK)
-                usb_log_warning("usb_hc_new_device_wrapper(): Failed to close "
-                    "connection.\n");
+                usb_log_warning("%s: Failed to close hc connection.\n",
+                    __FUNCTION__);
 
         return rc;