Changes in uspace/drv/ehci-hcd/pci.c [561112f:8855939] in mainline

File:

• uspace/drv/ehci-hcd/pci.c (modified) (4 diffs)

uspace/drv/ehci-hcd/pci.c

@@ -54 +54 @@
 
 #define CMD_OFFSET 0x0
-#define CONFIGFLAG_OFFSET 0x40
+#define STS_OFFSET 0x4
+#define CFG_OFFSET 0x40
 
 #define USBCMD_RUN 1
@@ -264 +265 @@
          * It would prevent pre-OS code from interfering. */
         ret = async_req_3_0(parent_phone, DEV_IFACE_ID(PCI_DEV_IFACE),
-           IPC_M_CONFIG_SPACE_WRITE_32, eecp + USBLEGCTLSTS_OFFSET, 0);
+           IPC_M_CONFIG_SPACE_WRITE_32, eecp + USBLEGCTLSTS_OFFSET,
+           0xe0000000);
         CHECK_RET_HANGUP_RETURN(ret, "Failed(%d) zero USBLEGCTLSTS.\n", ret);
-        usb_log_debug("Zeroed USBLEGCTLSTS register.\n");
 
         /* Read again Legacy Support and Control register */
@@ -291 +292 @@
         volatile uint32_t *usbcmd =
             (uint32_t*)((uint8_t*)registers + operation_offset + CMD_OFFSET);
+        volatile uint32_t *usbsts =
+            (uint32_t*)((uint8_t*)registers + operation_offset + STS_OFFSET);
         volatile uint32_t *usbconfigured =
-            (uint32_t*)((uint8_t*)registers + operation_offset
-            + CONFIGFLAG_OFFSET);
+            (uint32_t*)((uint8_t*)registers + operation_offset + CFG_OFFSET);
         usb_log_debug("USBCMD value: %x.\n", *usbcmd);
         if (*usbcmd & USBCMD_RUN) {
                 *usbcmd = 0;
+                while (!(*usbsts & (1 << 12))); /*wait until hc is halted */
                 *usbconfigured = 0;
                 usb_log_info("EHCI turned off.\n");
@@ -302 +305 @@
                 usb_log_info("EHCI was not running.\n");
         }
+        usb_log_debug("Registers: %x(0x00080000):%x(0x00001000):%x(0x0).\n",
+            *usbcmd, *usbsts, *usbconfigured);
 
         async_hangup(parent_phone);