Changes in / [557c7d0:8dd039a] in mainline


Ignore:
Location:
uspace
Files:
3 added
5 edited

Legend:

Unmodified
Added
Removed

  • uspace/drv/usbhub/Makefile

    r557c7d0 r8dd039a  
    3434SOURCES = \
    3535        main.c \
    36         utils.c
     36        utils.c \
     37        usbhub.c \
     38        usblist.c
    3739
    3840include $(USPACE_PREFIX)/Makefile.common

  • uspace/drv/usbhub/main.c

    r557c7d0 r8dd039a  
    3232
    3333#include <usb/usbdrv.h>
     34
    3435#include "usbhub.h"
    3536#include "usbhub_private.h"
    … …  
    5859int main(int argc, char *argv[])
    5960{
     61        usb_dprintf_enable(NAME,1);
    6062        usb_lst_init(&usb_hub_list);
    6163        fid_t fid = fibril_create(usb_hub_control_loop, NULL);
    6264        if (fid == 0) {
    63                 printf("%s: failed to start fibril for HUB devices\n", NAME);
     65                dprintf(1, "failed to start fibril for HUB devices");
     66                //printf("%s: failed to start fibril for HUB devices\n", NAME);
    6467                return ENOMEM;
    6568        }

  • uspace/drv/usbhub/usbhub_private.h

    r557c7d0 r8dd039a  
    3838
    3939#include "usbhub.h"
     40#include "usblist.h"
     41
    4042#include <adt/list.h>
    4143#include <bool.h>
    4244#include <driver.h>
    4345#include <usb/usb.h>
     46#include <usb/usbdrv.h>
    4447#include <usb/classes/hub.h>
    4548#include <usb/devreq.h>
     49#include <usb/debug.h>
    4650
    4751//************
    … …  
    5559//************
    5660//
    57 // My private list implementation; I did not like the original helenos list
    58 //
    59 // This one does not depend on the structure of stored data
     61// convenience debug printf
    6062//
    6163//************
    62 
    63 /** general list structure */
    64 
    65 
    66 typedef struct usb_general_list{
    67         void * data;
    68         struct usb_general_list * prev, * next;
    69 } usb_general_list_t;
    70 
    71 /** create head of usb general list */
    72 usb_general_list_t * usb_lst_create(void);
    73 
    74 /** initialize head of usb general list */
    75 void usb_lst_init(usb_general_list_t * lst);
    76 
    77 
    78 /** is the list empty? */
    79 static inline bool usb_lst_empty(usb_general_list_t * lst){
    80         return lst?(lst->next==lst):true;
    81 }
    82 
    83 /** append data behind item */
    84 void usb_lst_append(usb_general_list_t * lst, void * data);
    85 
    86 /** prepend data beore item */
    87 void usb_lst_prepend(usb_general_list_t * lst, void * data);
    88 
    89 /** remove list item from list */
    90 void usb_lst_remove(usb_general_list_t * item);
    91 
    92 /** get data o specified type from list item */
    93 #define usb_lst_get_data(item, type)  (type *) (item->data)
    94 
    95 /** get usb_hub_info_t data from list item */
    96 static inline usb_hub_info_t * usb_hub_lst_get_data(usb_general_list_t * item) {
    97         return usb_lst_get_data(item,usb_hub_info_t);
    98 }
     64#define dprintf(level, format, ...) \
     65        usb_dprintf(NAME, (level), format "\n", ##__VA_ARGS__)
    9966
    10067/**

  • uspace/drv/usbhub/utils.c

    r557c7d0 r8dd039a  
    3131 */
    3232/** @file
    33  * @brief Hub driver.
     33 * @brief various utilities
    3434 */
    3535#include <driver.h>
    … …  
    9090
    9191        if (sdescriptor[1] != USB_DESCTYPE_HUB) {
    92                 printf("[usb_hub] wrong descriptor %x\n",sdescriptor[1]);
     92                dprintf(1,"[usb_hub] wrong descriptor %x\n",sdescriptor[1]);
    9393                return NULL;
    9494        }
    … …  
    102102        result->pwr_on_2_good_time = sdescriptor[5];
    103103        result->current_requirement = sdescriptor[6];
    104         size_t var_size = result->ports_count / 8 + ((result->ports_count % 8 > 0) ? 1 : 0);
     104        size_t var_size = result->ports_count / 8 + ((result->ports_count % 8 > 0)
     105                        ? 1 : 0);
    105106        result->devices_removable = (uint8_t*) malloc(var_size);
    106107        //printf("[usb_hub] getting removable devices data \n");
    … …  
    198199}
    199200
    200 //list implementation
    201 
    202 usb_general_list_t * usb_lst_create(void) {
    203         usb_general_list_t* result = usb_new(usb_general_list_t);
    204         usb_lst_init(result);
    205         return result;
    206 }
    207 
    208 void usb_lst_init(usb_general_list_t * lst) {
    209         lst->prev = lst;
    210         lst->next = lst;
    211         lst->data = NULL;
    212 }
    213 
    214 void usb_lst_prepend(usb_general_list_t* item, void* data) {
    215         usb_general_list_t* appended = usb_new(usb_general_list_t);
    216         appended->data = data;
    217         appended->next = item;
    218         appended->prev = item->prev;
    219         item->prev->next = appended;
    220         item->prev = appended;
    221 }
    222 
    223 void usb_lst_append(usb_general_list_t* item, void* data) {
    224         usb_general_list_t* appended = usb_new(usb_general_list_t);
    225         appended->data = data;
    226         appended->next = item->next;
    227         appended->prev = item;
    228         item->next->prev = appended;
    229         item->next = appended;
    230 }
    231 
    232 void usb_lst_remove(usb_general_list_t* item) {
    233         item->next->prev = item->prev;
    234         item->prev->next = item->next;
    235 }
    236 
     201
     202/*
     203 * method for testing port status bitmap
     204 
    237205static void usb_hub_test_port_status(void) {
    238206        printf("[usb_hub] -------------port status test---------\n");
    … …  
    286254        //printf("this should be 0: %d \n",usb_port_get_bit(&status,4));
    287255
    288 
    289 
    290 
    291 }
    292 
    293 //*********************************************
    294 //
    295 //  hub driver code, initialization
    296 //
    297 //*********************************************
    298 
    299 usb_hub_info_t * usb_create_hub_info(device_t * device, int hc) {
    300         usb_hub_info_t* result = usb_new(usb_hub_info_t);
    301         //result->device = device;
    302         result->port_count = -1;
    303         /// \TODO is this correct? is the device stored?
    304         result->device = device;
    305 
    306 
    307         //printf("[usb_hub] phone to hc = %d\n", hc);
    308         if (hc < 0) {
    309                 return result;
    310         }
    311         //get some hub info
    312         usb_address_t addr = usb_drv_get_my_address(hc, device);
    313         printf("[usb_hub] addres of newly created hub = %d\n", addr);
    314         /*if(addr<0){
    315                 //return result;
    316                
    317         }*/
    318 
    319         result->usb_device = usb_new(usb_hcd_attached_device_info_t);
    320         result->usb_device->address = addr;
    321 
    322         // get hub descriptor
    323         usb_target_t target;
    324         target.address = addr;
    325         target.endpoint = 0;
    326         usb_device_request_setup_packet_t request;
    327         //printf("[usb_hub] creating descriptor request\n");
    328         usb_hub_set_descriptor_request(&request);
    329 
    330         //printf("[usb_hub] creating serialized descriptor\n");
    331         void * serialized_descriptor = malloc(USB_HUB_MAX_DESCRIPTOR_SIZE);
    332         usb_hub_descriptor_t * descriptor;
    333         size_t received_size;
    334         int opResult;
    335         //printf("[usb_hub] starting control transaction\n");
    336         opResult = usb_drv_sync_control_read(
    337                         hc, target, &request, serialized_descriptor,
    338                         USB_HUB_MAX_DESCRIPTOR_SIZE, &received_size);
    339         if (opResult != EOK) {
    340                 printf("[usb_hub] failed when receiving hub descriptor, badcode = %d\n",opResult);
    341                 ///\TODO memory leak will occur here!
    342                 return result;
    343         }
    344         //printf("[usb_hub] deserializing descriptor\n");
    345         descriptor = usb_deserialize_hub_desriptor(serialized_descriptor);
    346         if(descriptor==NULL){
    347                 printf("[usb_hub] could not deserialize descriptor \n");
    348                 result->port_count = 1;///\TODO this code is only for debug!!!
    349                 return result;
    350         }
    351         //printf("[usb_hub] setting port count to %d\n",descriptor->ports_count);
    352         result->port_count = descriptor->ports_count;
    353         result->attached_devs = (usb_hub_attached_device_t*)
    354             malloc((result->port_count+1) * sizeof(usb_hub_attached_device_t));
    355         int i;
    356         for(i=0;i<result->port_count+1;++i){
    357                 result->attached_devs[i].devman_handle=0;
    358                 result->attached_devs[i].address=0;
    359         }
    360         //printf("[usb_hub] freeing data\n");
    361         free(serialized_descriptor);
    362         free(descriptor->devices_removable);
    363         free(descriptor);
    364 
    365         //finish
    366 
    367         printf("[usb_hub] hub info created\n");
    368 
    369         return result;
    370 }
    371 
    372 int usb_add_hub_device(device_t *dev) {
    373         printf(NAME ": add_hub_device(handle=%d)\n", (int) dev->handle);
    374         printf("[usb_hub] hub device\n");
    375 
    376         /*
    377          * We are some (probably deeply nested) hub.
    378          * Thus, assign our own operations and explore already
    379          * connected devices.
    380          */
    381 
    382         //create the hub structure
    383         //get hc connection
    384         /// \TODO correct params
    385         int hc = usb_drv_hc_connect(dev, 0);
    386 
    387         usb_hub_info_t * hub_info = usb_create_hub_info(dev, hc);
    388         int port;
    389         int opResult;
    390         usb_device_request_setup_packet_t request;
    391         usb_target_t target;
    392         target.address = hub_info->usb_device->address;
    393         target.endpoint = 0;
    394 
    395         //get configuration descriptor
    396         // this is not fully correct - there are more configurations
    397         // and all should be checked
    398         usb_standard_device_descriptor_t std_descriptor;
    399         opResult = usb_drv_req_get_device_descriptor(hc, target.address,
    400     &std_descriptor);
    401         if(opResult!=EOK){
    402                 printf("[usb_hub] could not get device descriptor, %d\n",opResult);
    403                 return 1;///\TODO some proper error code needed
    404         }
    405         printf("[usb_hub] hub has %d configurations\n",std_descriptor.configuration_count);
    406         if(std_descriptor.configuration_count<1){
    407                 printf("[usb_hub] THERE ARE NO CONFIGURATIONS AVAILABLE\n");
    408         }
    409         usb_standard_configuration_descriptor_t config_descriptor;
    410         opResult = usb_drv_req_get_bare_configuration_descriptor(hc,
    411         target.address, 0,
    412         &config_descriptor);
    413         if(opResult!=EOK){
    414                 printf("[usb_hub] could not get configuration descriptor, %d\n",opResult);
    415                 return 1;///\TODO some proper error code needed
    416         }
    417         //set configuration
    418         request.request_type = 0;
    419         request.request = USB_DEVREQ_SET_CONFIGURATION;
    420         request.index=0;
    421         request.length=0;
    422         request.value_high=0;
    423         request.value_low = config_descriptor.configuration_number;
    424         opResult = usb_drv_sync_control_write(hc, target, &request, NULL, 0);
    425         if (opResult != EOK) {
    426                 printf("[usb_hub]something went wrong when setting hub`s configuration, %d\n", opResult);
    427         }
    428 
    429 
    430         for (port = 1; port < hub_info->port_count+1; ++port) {
    431                 usb_hub_set_power_port_request(&request, port);
    432                 opResult = usb_drv_sync_control_write(hc, target, &request, NULL, 0);
    433                 printf("[usb_hub] powering port %d\n",port);
    434                 if (opResult != EOK) {
    435                         printf("[usb_hub]something went wrong when setting hub`s %dth port\n", port);
    436                 }
    437         }
    438         //ports powered, hub seems to be enabled
    439        
    440 
    441         ipc_hangup(hc);
    442 
    443         //add the hub to list
    444         usb_lst_append(&usb_hub_list, hub_info);
    445         printf("[usb_hub] hub info added to list\n");
    446         //(void)hub_info;
    447         usb_hub_check_hub_changes();
    448 
    449         /// \TODO start the check loop, if not already started...
    450 
    451         //this is just a test for port status bitmap type
    452         usb_hub_test_port_status();
    453 
    454         printf("[usb_hub] hub dev added\n");
    455         printf("\taddress %d, has %d ports \n",
    456                         hub_info->usb_device->address,
    457                         hub_info->port_count);
    458         printf("\tused configuration %d\n",config_descriptor.configuration_number);
    459 
    460         return EOK;
    461         //return ENOTSUP;
    462 }
    463 
    464 //*********************************************
    465 //
    466 //  hub driver code, main loop
    467 //
    468 //*********************************************
    469 
    470 /**
    471  * reset the port with new device and reserve the default address
    472  * @param hc
    473  * @param port
    474  * @param target
    475  */
    476 static void usb_hub_init_add_device(int hc, uint16_t port, usb_target_t target) {
    477         usb_device_request_setup_packet_t request;
    478         int opResult;
    479         printf("[usb_hub] some connection changed\n");
    480         //get default address
    481         opResult = usb_drv_reserve_default_address(hc);
    482         if (opResult != EOK) {
    483                 printf("[usb_hub] cannot assign default address, it is probably used\n");
    484                 return;
    485         }
    486         //reset port
    487         usb_hub_set_reset_port_request(&request, port);
    488         opResult = usb_drv_sync_control_write(
    489                         hc, target,
    490                         &request,
    491                         NULL, 0
    492                         );
    493         if (opResult != EOK) {
    494                 //continue;
    495                 printf("[usb_hub] something went wrong when reseting a port\n");
    496         }
    497 }
    498 
    499 /**
    500  * finalize adding new device after port reset
    501  * @param hc
    502  * @param port
    503  * @param target
    504  */
    505 static void usb_hub_finalize_add_device( usb_hub_info_t * hub,
    506                 int hc, uint16_t port, usb_target_t target) {
    507 
    508         int opResult;
    509         printf("[usb_hub] finalizing add device\n");
    510         opResult = usb_hub_clear_port_feature(hc, target.address,
    511             port, USB_HUB_FEATURE_C_PORT_RESET);
    512         if (opResult != EOK) {
    513                 goto release;
    514         }
    515 
    516         /* Request address at from host controller. */
    517         usb_address_t new_device_address = usb_drv_request_address(hc);
    518         if (new_device_address < 0) {
    519                 printf("[usb_hub] failed to get free USB address\n");
    520                 opResult = new_device_address;
    521                 goto release;
    522         }
    523         printf("[usb_hub] setting new address\n");
    524         opResult = usb_drv_req_set_address(hc, USB_ADDRESS_DEFAULT,
    525             new_device_address);
    526 
    527         if (opResult != EOK) {
    528                 printf("[usb_hub] could not set address for new device\n");
    529                 goto release;
    530         }
    531 
    532 release:
    533         printf("[usb_hub] releasing default address\n");
    534         usb_drv_release_default_address(hc);
    535         if (opResult != EOK) {
    536                 return;
    537         }
    538 
    539         devman_handle_t child_handle;
    540         opResult = usb_drv_register_child_in_devman(hc, hub->device,
    541             new_device_address, &child_handle);
    542         if (opResult != EOK) {
    543                 printf("[usb_hub] could not start driver for new device \n");
    544                 return;
    545         }
    546         hub->attached_devs[port].devman_handle = child_handle;
    547         hub->attached_devs[port].address = new_device_address;
    548 
    549         opResult = usb_drv_bind_address(hc, new_device_address, child_handle);
    550         if (opResult != EOK) {
    551                 printf("[usb_hub] could not assign address of device in hcd \n");
    552                 return;
    553         }
    554         printf("[usb_hub] new device address %d, handle %zu\n",
    555             new_device_address, child_handle);
    556        
    557 }
    558 
    559 /**
    560  * unregister device address in hc, close the port
    561  * @param hc
    562  * @param port
    563  * @param target
    564  */
    565 static void usb_hub_removed_device(
    566     usb_hub_info_t * hub, int hc, uint16_t port, usb_target_t target) {
    567         //usb_device_request_setup_packet_t request;
    568         int opResult;
    569         //disable port
    570         /*usb_hub_set_disable_port_request(&request, port);
    571         opResult = usb_drv_sync_control_write(
    572                         hc, target,
    573                         &request,
    574                         NULL, 0
    575                         );
    576         if (opResult != EOK) {
    577                 //continue;
    578                 printf("[usb_hub] something went wrong when disabling a port\n");
    579         }*/
    580         /// \TODO remove device
    581 
    582         hub->attached_devs[port].devman_handle=0;
    583         //close address
    584         if(hub->attached_devs[port].address!=0){
    585                 opResult = usb_drv_release_address(hc,hub->attached_devs[port].address);
    586                 if(opResult != EOK) {
    587                         printf("[usb_hub] could not release address of removed device: %d\n",opResult);
    588                 }
    589                 hub->attached_devs[port].address = 0;
    590         }else{
    591                 printf("[usb_hub] this is strange, disconnected device had no address\n");
    592                 //device was disconnected before it`s port was reset - return default address
    593                 usb_drv_release_default_address(hc);
    594         }
    595 }
    596 
    597 /**
    598  * process interrupts on given hub port
    599  * @param hc
    600  * @param port
    601  * @param target
    602  */
    603 static void usb_hub_process_interrupt(usb_hub_info_t * hub, int hc,
    604         uint16_t port, usb_address_t address) {
    605         printf("[usb_hub] interrupt at port %d\n", port);
    606         //determine type of change
    607         usb_target_t target;
    608         target.address=address;
    609         target.endpoint=0;
    610         usb_port_status_t status;
    611         size_t rcvd_size;
    612         usb_device_request_setup_packet_t request;
    613         int opResult;
    614         usb_hub_set_port_status_request(&request, port);
    615         //endpoint 0
    616 
    617         opResult = usb_drv_sync_control_read(
    618                         hc, target,
    619                         &request,
    620                         &status, 4, &rcvd_size
    621                         );
    622         if (opResult != EOK) {
    623                 printf("[usb_hub] ERROR: could not get port status\n");
    624                 return;
    625         }
    626         if (rcvd_size != sizeof (usb_port_status_t)) {
    627                 printf("[usb_hub] ERROR: received status has incorrect size\n");
    628                 return;
    629         }
    630         //something connected/disconnected
    631         if (usb_port_connect_change(&status)) {
    632                 opResult = usb_hub_clear_port_feature(hc, target.address,
    633                     port, USB_HUB_FEATURE_C_PORT_CONNECTION);
    634                 // TODO: check opResult
    635                 if (usb_port_dev_connected(&status)) {
    636                         printf("[usb_hub] some connection changed\n");
    637                         usb_hub_init_add_device(hc, port, target);
    638                 } else {
    639                         usb_hub_removed_device(hub, hc, port, target);
    640                 }
    641         }
    642         //port reset
    643         if (usb_port_reset_completed(&status)) {
    644                 printf("[usb_hub] port reset complete\n");
    645                 if (usb_port_enabled(&status)) {
    646                         usb_hub_finalize_add_device(hub, hc, port, target);
    647                 } else {
    648                         printf("[usb_hub] ERROR: port reset, but port still not enabled\n");
    649                 }
    650         }
    651 
    652         usb_port_set_connect_change(&status, false);
    653         usb_port_set_reset(&status, false);
    654         usb_port_set_reset_completed(&status, false);
    655         usb_port_set_dev_connected(&status, false);
    656         if (status) {
    657                 printf("[usb_hub]there was some unsupported change on port %d\n",port);
    658         }
    659         /// \TODO handle other changes
    660         /// \TODO debug log for various situations
    661 
    662 
    663 
    664         /*
    665         //configure device
    666         usb_drv_reserve_default_address(hc);
    667 
    668         usb_address_t new_device_address = usb_drv_request_address(hc);
    669 
    670 
    671         usb_drv_release_default_address(hc);
    672          * */
    673 }
    674 
    675 /** Check changes on all known hubs.
    676  */
    677 void usb_hub_check_hub_changes(void) {
    678         /*
    679          * Iterate through all hubs.
    680          */
    681         usb_general_list_t * lst_item;
    682         for (lst_item = usb_hub_list.next;
    683                         lst_item != &usb_hub_list;
    684                         lst_item = lst_item->next) {
    685                 usb_hub_info_t * hub_info = ((usb_hub_info_t*)lst_item->data);
    686                 /*
    687                  * Check status change pipe of this hub.
    688                  */
    689 
    690                 usb_target_t target;
    691                 target.address = hub_info->usb_device->address;
    692                 target.endpoint = 1;/// \TODO get from endpoint descriptor
    693                 printf("[usb_hub] checking changes for hub at addr %d\n",
    694                     target.address);
    695 
    696                 size_t port_count = hub_info->port_count;
    697 
    698                 /*
    699                  * Connect to respective HC.
    700                  */
    701                 int hc = usb_drv_hc_connect(hub_info->device, 0);
    702                 if (hc < 0) {
    703                         continue;
    704                 }
    705 
    706                 // FIXME: count properly
    707                 size_t byte_length = ((port_count+1) / 8) + 1;
    708 
    709                 void *change_bitmap = malloc(byte_length);
    710                 size_t actual_size;
    711                 usb_handle_t handle;
    712 
    713                 /*
    714                  * Send the request.
    715                  */
    716                 int opResult = usb_drv_async_interrupt_in(hc, target,
    717                                 change_bitmap, byte_length, &actual_size,
    718                                 &handle);
    719 
    720                 usb_drv_async_wait_for(handle);
    721 
    722                 if (opResult != EOK) {
    723                         printf("[usb_hub] something went wrong while getting status of hub\n");
    724                         continue;
    725                 }
    726                 unsigned int port;
    727                 for (port = 1; port < port_count+1; ++port) {
    728                         bool interrupt = (((uint8_t*) change_bitmap)[port / 8] >> (port % 8)) % 2;
    729                         if (interrupt) {
    730                                 usb_hub_process_interrupt(
    731                                         hub_info, hc, port, hub_info->usb_device->address);
    732                         }
    733                 }
    734 
    735 
    736                 /*
    737                  * TODO: handle the changes.
    738                  */
    739 
    740                 /*
    741                  * WARNING: sample code, will not work out of the box.
    742                  * And does not contain code for checking for errors.
    743                  */
    744 #if 0
    745                 /*
    746                  * Before opening the port, we must acquire the default
    747                  * address.
    748                  */
    749                 usb_drv_reserve_default_address(hc);
    750 
    751                 usb_address_t new_device_address = usb_drv_request_address(hc);
    752 
    753                 // TODO: open the port
    754 
    755                 // TODO: send request for setting address to new_device_address
    756 
    757                 /*
    758                  * Once new address is set, we can release the default
    759                  * address.
    760                  */
    761                 usb_drv_release_default_address(hc);
    762 
    763                 /*
    764                  * Obtain descriptors and create match ids for devman.
    765                  */
    766 
    767                 // TODO: get device descriptors
    768 
    769                 // TODO: create match ids
    770 
    771                 // TODO: add child device
    772 
    773                 // child_device_register sets the device handle
    774                 // TODO: store it here
    775                 devman_handle_t new_device_handle = 0;
    776 
    777                 /*
    778                  * Inform the HC that the new device has devman handle
    779                  * assigned.
    780                  */
    781                 usb_drv_bind_address(hc, new_device_address, new_device_handle);
    782 
    783                 /*
    784                  * That's all.
    785                  */
    786 #endif
    787 
    788 
    789                 /*
    790                  * Hang-up the HC-connected phone.
    791                  */
    792                 ipc_hangup(hc);
    793         }
    794 }
     256}
     257*/
     258
    795259
    796260/**

  • uspace/lib/usb/include/usb/hcdhubd.h

    r557c7d0 r8dd039a  
    207207int usb_hc_add_child_device(device_t *, const char *, const char *, bool);
    208208
     209
     210/**
     211 * @}
     212 */
     213
    209214#endif
Note: See TracChangeset for help on using the changeset viewer.