Changes in / [049eb87:fd3940c1] in mainline

Location:

uspace

Files:

• drv/usbhub/Makefile (modified) (1 diff)
• drv/usbhub/ports.c (added)
• drv/usbhub/ports.h (added)
• drv/usbhub/usbhub.c (modified) (8 diffs)
• drv/usbhub/usbhub.h (modified) (2 diffs)
• drv/usbhub/usbhub_private.h (modified) (1 diff)
• drv/usbhub/usblist.c (deleted)
• drv/usbhub/usblist.h (deleted)
• lib/usb/src/host/usb_endpoint_manager.c (modified) (1 diff)
• lib/usb/src/hub.c (modified) (6 diffs)

uspace/drv/usbhub/Makefile

@@ -34 +34 @@
 SOURCES = \
         main.c \
+        ports.c \
         utils.c \
-        usbhub.c \
-        usblist.c
+        usbhub.c
 
 include $(USPACE_PREFIX)/Makefile.common

uspace/drv/usbhub/usbhub.c

@@ -53 +53 @@
 #include "usb/classes/classes.h"
 
-
-static void usb_hub_init_add_device(usb_hub_info_t * hub, uint16_t port,
-                usb_speed_t speed);
-
 static int usb_hub_trigger_connecting_non_removable_devices(
                 usb_hub_info_t * hub, usb_hub_descriptor_t * descriptor);
-
-/**
- * control loop running in hub`s fibril
- *
- * Hub`s fibril periodically asks for changes on hub and if needded calls
- * change handling routine.
- * @warning currently hub driver asks for changes once a second
- * @param hub_info_param hub representation pointer
- * @return zero
- */
-int usb_hub_control_loop(void * hub_info_param){
-        usb_hub_info_t * hub_info = (usb_hub_info_t*)hub_info_param;
-        int errorCode = EOK;
-
-        while(errorCode == EOK){
-                async_usleep(1000 * 1000 * 10 );/// \TODO proper number once
-                errorCode = usb_hub_check_hub_changes(hub_info);
-        }
-        usb_log_error("something in ctrl loop went wrong, errno %d\n",errorCode);
-
-        return 0;
-}
 
 
@@ -152 +126 @@
         usb_log_debug("setting port count to %d\n",descriptor->ports_count);
         hub_info->port_count = descriptor->ports_count;
-        hub_info->attached_devs = (usb_hc_attached_device_t*)
-            malloc((hub_info->port_count+1) * sizeof(usb_hc_attached_device_t));
-        int i;
-        for(i=0;i<hub_info->port_count+1;++i){
-                hub_info->attached_devs[i].handle=0;
-                hub_info->attached_devs[i].address=0;
+        hub_info->ports = malloc(sizeof(usb_hub_port_t) * (hub_info->port_count+1));
+        size_t port;
+        for (port = 0; port < hub_info->port_count + 1; port++) {
+                usb_hub_port_init(&hub_info->ports[port]);
         }
         //handle non-removable devices
@@ -259 +231 @@
         assert(rc == EOK);
 
-        //create fibril for the hub control loop
-        fid_t fid = fibril_create(usb_hub_control_loop, hub_info);
-        if (fid == 0) {
-                usb_log_error("failed to start monitoring fibril for new hub.\n");
-                return ENOMEM;
-        }
-        fibril_add_ready(fid);
-        usb_log_debug("Hub fibril created.\n");
+        /*
+         * The processing will require opened control pipe and connection
+         * to the host controller.
+         * It is waste of resources but let's hope there will be less
+         * hubs than the phone limit.
+         * FIXME: with some proper locking over pipes and session
+         * auto destruction, this could work better.
+         */
+        rc = usb_pipe_start_session(&usb_dev->ctrl_pipe);
+        if (rc != EOK) {
+                usb_log_error("Failed to start session on control pipe: %s.\n",
+                    str_error(rc));
+                goto leave;
+        }
+        rc = usb_hc_connection_open(&hub_info->connection);
+        if (rc != EOK) {
+                usb_pipe_end_session(&usb_dev->ctrl_pipe);
+                usb_log_error("Failed to open connection to HC: %s.\n",
+                    str_error(rc));
+                goto leave;
+        }
+
+        rc = usb_device_auto_poll(hub_info->usb_device, 0,
+            hub_port_changes_callback, ((hub_info->port_count+1) / 8) + 1,
+            NULL, hub_info);
+        if (rc != EOK) {
+                usb_log_error("Failed to create polling fibril: %s.\n",
+                    str_error(rc));
+                free(hub_info);
+                return rc;
+        }
 
         usb_log_info("Controlling hub `%s' (%d ports).\n",
             hub_info->usb_device->ddf_dev->name, hub_info->port_count);
         return EOK;
+
+leave:
+        free(hub_info);
+
+        return rc;
 }
 
@@ -400 +400 @@
 
 /**
- * Reset the port with new device and reserve the default address.
- * @param hub hub representation
- * @param port port number, starting from 1
- * @param speed transfer speed of attached device, one of low, full or high
- */
-static void usb_hub_init_add_device(usb_hub_info_t * hub, uint16_t port,
-                usb_speed_t speed) {
-        //if this hub already uses default address, it cannot request it once more
-        if(hub->is_default_address_used) return;
-        usb_log_debug("some connection changed\n");
-        assert(hub->control_pipe->hc_phone);
-        int opResult = usb_hub_clear_port_feature(hub->control_pipe,
-                                port, USB_HUB_FEATURE_C_PORT_CONNECTION);
-        if(opResult != EOK){
-                usb_log_warning("could not clear port-change-connection flag\n");
-        }
-        usb_device_request_setup_packet_t request;
-        
-        //get default address
-        opResult = usb_hc_reserve_default_address(&hub->connection, speed);
-        
-        if (opResult != EOK) {
-                usb_log_warning("cannot assign default address, it is probably used %d\n",
-                                opResult);
-                return;
-        }
-        hub->is_default_address_used = true;
-        //reset port
-        usb_hub_set_reset_port_request(&request, port);
-        opResult = usb_pipe_control_write(
-                        hub->control_pipe,
-                        &request,sizeof(usb_device_request_setup_packet_t),
-                        NULL, 0
-                        );
-        if (opResult != EOK) {
-                usb_log_error("something went wrong when reseting a port %d\n",opResult);
-                usb_hub_release_default_address(hub);
-        }
-        return;
-}
-
-/**
- * Finalize adding new device after port reset
- *
- * Set device`s address and start it`s driver.
- * @param hub hub representation
- * @param port port number, starting from 1
- * @param speed transfer speed of attached device, one of low, full or high
- */
-static void usb_hub_finalize_add_device( usb_hub_info_t * hub,
-                uint16_t port, usb_speed_t speed) {
-
-        int opResult;
-        usb_log_debug("finalizing add device\n");
-        opResult = usb_hub_clear_port_feature(hub->control_pipe,
-            port, USB_HUB_FEATURE_C_PORT_RESET);
-
-        if (opResult != EOK) {
-                usb_log_error("failed to clear port reset feature\n");
-                usb_hub_release_default_address(hub);
-                return;
-        }
-        //create connection to device
-        usb_pipe_t new_device_pipe;
-        usb_device_connection_t new_device_connection;
-        usb_device_connection_initialize_on_default_address(
-                        &new_device_connection,
-                        &hub->connection
-                        );
-        usb_pipe_initialize_default_control(
-                        &new_device_pipe,
-                        &new_device_connection);
-        usb_pipe_probe_default_control(&new_device_pipe);
-
-        /* Request address from host controller. */
-        usb_address_t new_device_address = usb_hc_request_address(
-                        &hub->connection,
-                        speed
-                        );
-        if (new_device_address < 0) {
-                usb_log_error("failed to get free USB address\n");
-                opResult = new_device_address;
-                usb_hub_release_default_address(hub);
-                return;
-        }
-        usb_log_debug("setting new address %d\n",new_device_address);
-        //opResult = usb_drv_req_set_address(hc, USB_ADDRESS_DEFAULT,
-        //    new_device_address);
-        usb_pipe_start_session(&new_device_pipe);
-        opResult = usb_request_set_address(&new_device_pipe,new_device_address);
-        usb_pipe_end_session(&new_device_pipe);
-        if (opResult != EOK) {
-                usb_log_error("could not set address for new device %d\n",opResult);
-                usb_hub_release_default_address(hub);
-                return;
-        }
-
-        //opResult = usb_hub_release_default_address(hc);
-        opResult = usb_hub_release_default_address(hub);
-        if(opResult!=EOK){
-                return;
-        }
-
-        devman_handle_t child_handle;
-        //??
-    opResult = usb_device_register_child_in_devman(new_device_address,
-            hub->connection.hc_handle, hub->usb_device->ddf_dev, &child_handle,
-            NULL, NULL, NULL);
-
-        if (opResult != EOK) {
-                usb_log_error("could not start driver for new device %d\n",opResult);
-                return;
-        }
-        hub->attached_devs[port].handle = child_handle;
-        hub->attached_devs[port].address = new_device_address;
-
-        //opResult = usb_drv_bind_address(hc, new_device_address, child_handle);
-        opResult = usb_hc_register_device(
-                        &hub->connection,
-                        &hub->attached_devs[port]);
-        if (opResult != EOK) {
-                usb_log_error("could not assign address of device in hcd %d\n",opResult);
-                return;
-        }
-        usb_log_info("Detected new device on `%s' (port %d), " \
-            "address %d (handle %llu).\n",
-            hub->usb_device->ddf_dev->name, (int) port,
-            new_device_address, child_handle);
-}
-
-/**
  * routine called when a device on port has been removed
  *
@@ -539 +408 @@
  * @param port port number, starting from 1
  */
-static void usb_hub_removed_device(
+void usb_hub_removed_device(
     usb_hub_info_t * hub,uint16_t port) {
 
@@ -552 +421 @@
         
         //close address
-        if(hub->attached_devs[port].address!=0){
+        if(hub->ports[port].attached_device.address >= 0){
                 /*uncomment this code to use it when DDF allows device removal
                 opResult = usb_hc_unregister_device(
@@ -579 +448 @@
  * @param port port number, starting from 1
  */
-static void usb_hub_over_current( usb_hub_info_t * hub,
+void usb_hub_over_current( usb_hub_info_t * hub,
                 uint16_t port){
         int opResult;
@@ -590 +459 @@
 }
 
-/**
- * Process interrupts on given hub port
- *
- * Accepts connection, over current and port reset change.
- * @param hub hub representation
- * @param port port number, starting from 1
- */
-static void usb_hub_process_interrupt(usb_hub_info_t * hub, 
-        uint16_t port) {
-        usb_log_debug("interrupt at port %d\n", port);
-        //determine type of change
-        usb_pipe_t *pipe = hub->control_pipe;
-        
-        int opResult;
-
-        usb_port_status_t status;
-        size_t rcvd_size;
-        usb_device_request_setup_packet_t request;
-        //int opResult;
-        usb_hub_set_port_status_request(&request, port);
-        //endpoint 0
-
-        opResult = usb_pipe_control_read(
-                        pipe,
-                        &request, sizeof(usb_device_request_setup_packet_t),
-                        &status, 4, &rcvd_size
-                        );
-        if (opResult != EOK) {
-                usb_log_error("could not get port status\n");
-                return;
-        }
-        if (rcvd_size != sizeof (usb_port_status_t)) {
-                usb_log_error("received status has incorrect size\n");
-                return;
-        }
-        //something connected/disconnected
-        if (usb_port_connect_change(&status)) {
-                usb_log_debug("connection change on port\n");
-                if (usb_port_dev_connected(&status)) {
-                        usb_log_debug("some connection changed\n");
-                        usb_hub_init_add_device(hub, port, usb_port_speed(&status));
-                } else {
-                        usb_hub_removed_device(hub, port);
-                }
-        }
-        //over current
-        if (usb_port_overcurrent_change(&status)) {
-                //check if it was not auto-resolved
-                usb_log_debug("overcurrent change on port\n");
-                if(usb_port_over_current(&status)){
-                        usb_hub_over_current(hub,port);
-                }else{
-                        usb_log_debug("over current condition was auto-resolved on port %d\n",
-                                        port);
-                }
-        }
-        //port reset
-        if (usb_port_reset_completed(&status)) {
-                usb_log_debug("port reset complete\n");
-                if (usb_port_enabled(&status)) {
-                        usb_hub_finalize_add_device(hub, port, usb_port_speed(&status));
-                } else {
-                        usb_log_warning("port reset, but port still not enabled\n");
-                }
-        }
-        usb_log_debug("status %x\n ",status);
-
-        usb_port_set_connect_change(&status, false);
-        usb_port_set_reset(&status, false);
-        usb_port_set_reset_completed(&status, false);
-        usb_port_set_dev_connected(&status, false);
-        if (status>>16) {
-                usb_log_info("there was some unsupported change on port %d: %X\n",
-                                port,status);
-
-        }
-}
-
-/**
- * check changes on hub
- *
- * Handles changes on each port with a status change.
- * @param hub_info hub representation
- * @return error code
- */
-int usb_hub_check_hub_changes(usb_hub_info_t * hub_info){
-        int opResult;
-        opResult = usb_pipe_start_session(
-                        hub_info->status_change_pipe);
-        if(opResult != EOK){
-                usb_log_error("could not initialize communication for hub; %d\n",
-                                opResult);
-                return opResult;
-        }
-
-        size_t port_count = hub_info->port_count;
-
-        /// FIXME: count properly
-        size_t byte_length = ((port_count+1) / 8) + 1;
-                void *change_bitmap = malloc(byte_length);
-        size_t actual_size;
-
-        /*
-         * Send the request.
-         */
-        opResult = usb_pipe_read(
-                        hub_info->status_change_pipe,
-                        change_bitmap, byte_length, &actual_size
-                        );
-
-        if (opResult != EOK) {
-                free(change_bitmap);
-                usb_log_warning("something went wrong while getting status of hub\n");
-                usb_pipe_end_session(hub_info->status_change_pipe);
-                return opResult;
-        }
-        unsigned int port;
-        opResult = usb_pipe_start_session(hub_info->control_pipe);
-        if(opResult!=EOK){
-                usb_log_error("could not start control pipe session %d\n", opResult);
-                usb_pipe_end_session(hub_info->status_change_pipe);
-                return opResult;
-        }
-        opResult = usb_hc_connection_open(&hub_info->connection);
-        if(opResult!=EOK){
-                usb_log_error("could not start host controller session %d\n",
-                                opResult);
-                usb_pipe_end_session(hub_info->control_pipe);
-                usb_pipe_end_session(hub_info->status_change_pipe);
-                return opResult;
-        }
-
-        ///todo, opresult check, pre obe konekce
-        for (port = 1; port < port_count+1; ++port) {
-                bool interrupt =
-                                (((uint8_t*) change_bitmap)[port / 8] >> (port % 8)) % 2;
-                if (interrupt) {
-                        usb_hub_process_interrupt(
-                                hub_info, port);
-                }
-        }
-        usb_hc_connection_close(&hub_info->connection);
-        usb_pipe_end_session(hub_info->control_pipe);
-        usb_pipe_end_session(hub_info->status_change_pipe);
-        free(change_bitmap);
-        return EOK;
-}
-
-
 
 /**

uspace/drv/usbhub/usbhub.h

@@ -47 +47 @@
 #include <usb/devdrv.h>
 
+#include "ports.h"
+
+
 
 /** Information about attached hub. */
 typedef struct {
         /** Number of ports. */
-        int port_count;
+        size_t port_count;
 
-        /** attached device handles, for each port one */
-        usb_hc_attached_device_t * attached_devs;
+        /** Ports. */
+        usb_hub_port_t *ports;
         
         /** connection to hcd */
@@ -100 +103 @@
 int usb_hub_check_hub_changes(usb_hub_info_t * hub_info_param);
 
+void usb_hub_removed_device(usb_hub_info_t *, uint16_t);
+void usb_hub_over_current(usb_hub_info_t *, uint16_t);
 
 int usb_hub_add_device(usb_device_t * usb_dev);

uspace/drv/usbhub/usbhub_private.h

@@ -38 +38 @@
 
 #include "usbhub.h"
-#include "usblist.h"
 
 #include <adt/list.h>

uspace/lib/usb/src/host/usb_endpoint_manager.c

@@ -91 +91 @@
     size_t size, size_t max_packet_size)
 {
+        /* We care about bandwidth only for interrupt and isochronous. */
+        if ((type != USB_TRANSFER_INTERRUPT)
+            && (type != USB_TRANSFER_ISOCHRONOUS)) {
+                return 0;
+        }
+
         const unsigned packet_count =
             (size + max_packet_size - 1) / max_packet_size;

uspace/lib/usb/src/hub.c

@@ -142 +142 @@
             DEV_IFACE_ID(USBHC_DEV_IFACE),
             IPC_M_USBHC_RELEASE_ADDRESS, address);
+}
+
+static void unregister_control_endpoint_on_default_address(
+    usb_hc_connection_t *connection)
+{
+        usb_device_connection_t dev_conn;
+        int rc = usb_device_connection_initialize_on_default_address(&dev_conn,
+            connection);
+        if (rc != EOK) {
+                return;
+        }
+
+        usb_pipe_t ctrl_pipe;
+        rc = usb_pipe_initialize_default_control(&ctrl_pipe, &dev_conn);
+        if (rc != EOK) {
+                return;
+        }
+
+        usb_pipe_unregister(&ctrl_pipe, connection);
 }
 
@@ -235 +254 @@
                 goto leave_release_default_address;
         }
+
+        /* Before sending any traffic, we need to register this
+         * endpoint.
+         */
+        rc = usb_pipe_register(&ctrl_pipe, 0, connection);
+        if (rc != EOK) {
+                rc = EREFUSED;
+                goto leave_release_default_address;
+        }
         rc = usb_pipe_probe_default_control(&ctrl_pipe);
         if (rc != EOK) {
@@ -244 +272 @@
         if (rc != EOK) {
                 rc = ENOTCONN;
-                goto leave_release_default_address;
+                goto leave_unregister_endpoint;
         }
 
@@ -256 +284 @@
 
         /*
+         * Register the control endpoint for the new device.
+         */
+        rc = usb_pipe_register(&ctrl_pipe, 0, connection);
+        if (rc != EOK) {
+                rc = EREFUSED;
+                goto leave_unregister_endpoint;
+        }
+
+        /*
+         * Release the original endpoint.
+         */
+        unregister_control_endpoint_on_default_address(connection);
+
+        /*
          * Once the address is changed, we can return the default address.
          */
         usb_hc_release_default_address(connection);
+
 
         /*
@@ -273 +316 @@
         }
 
+
+
         /*
          * And now inform the host controller about the handle.
@@ -308 +353 @@
         usb_pipe_end_session(&ctrl_pipe);
 
+leave_unregister_endpoint:
+        usb_pipe_unregister(&ctrl_pipe, connection);
+
 leave_release_default_address:
         usb_hc_release_default_address(connection);