Changeset 93fb170c in mainline for uspace/srv/bd/ata_bd/ata_bd.h
- Timestamp:
- 2011-01-08T18:51:31Z (14 years ago)
- Branches:
- lfn, master, serial, ticket/834-toolchain-update, topic/msim-upgrade, topic/simplify-dev-export
- Children:
- 15be932
- Parents:
- 8f748215 (diff), a523af4 (diff)
Note: this is a merge changeset, the changes displayed below correspond to the merge itself.
Use the(diff)
links above to see all the changes relative to each parent. - File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
uspace/srv/bd/ata_bd/ata_bd.h
r8f748215 r93fb170c 30 30 * @{ 31 31 */ 32 /** @file 32 /** @file ATA driver definitions. 33 33 */ 34 34 … … 40 40 #include <str.h> 41 41 42 enum { 43 CTL_READ_START = 0, 44 CTL_WRITE_START = 1, 45 }; 46 47 enum { 48 STATUS_FAILURE = 0 49 }; 50 51 enum { 52 MAX_DISKS = 2 53 }; 54 55 /** ATA Command Register Block. */ 56 typedef union { 57 /* Read/Write */ 58 struct { 59 uint16_t data_port; 60 uint8_t sector_count; 61 uint8_t sector_number; 62 uint8_t cylinder_low; 63 uint8_t cylinder_high; 64 uint8_t drive_head; 65 uint8_t pad_rw0; 66 }; 67 68 /* Read Only */ 69 struct { 70 uint8_t pad_ro0; 71 uint8_t error; 72 uint8_t pad_ro1[5]; 73 uint8_t status; 74 }; 75 76 /* Write Only */ 77 struct { 78 uint8_t pad_wo0; 79 uint8_t features; 80 uint8_t pad_wo1[5]; 81 uint8_t command; 82 }; 83 } ata_cmd_t; 84 85 typedef union { 86 /* Read */ 87 struct { 88 uint8_t pad0[6]; 89 uint8_t alt_status; 90 uint8_t drive_address; 91 }; 92 93 /* Write */ 94 struct { 95 uint8_t pad1[6]; 96 uint8_t device_control; 97 uint8_t pad2; 98 }; 99 } ata_ctl_t; 100 101 enum devctl_bits { 102 DCR_SRST = 0x04, /**< Software Reset */ 103 DCR_nIEN = 0x02 /**< Interrupt Enable (negated) */ 104 }; 105 106 enum status_bits { 107 SR_BSY = 0x80, /**< Busy */ 108 SR_DRDY = 0x40, /**< Drive Ready */ 109 SR_DWF = 0x20, /**< Drive Write Fault */ 110 SR_DSC = 0x10, /**< Drive Seek Complete */ 111 SR_DRQ = 0x08, /**< Data Request */ 112 SR_CORR = 0x04, /**< Corrected Data */ 113 SR_IDX = 0x02, /**< Index */ 114 SR_ERR = 0x01 /**< Error */ 115 }; 116 117 enum drive_head_bits { 118 DHR_LBA = 0x40, /**< Use LBA addressing mode */ 119 DHR_DRV = 0x10 /**< Select device 1 */ 120 }; 121 122 enum error_bits { 123 ER_BBK = 0x80, /**< Bad Block Detected */ 124 ER_UNC = 0x40, /**< Uncorrectable Data Error */ 125 ER_MC = 0x20, /**< Media Changed */ 126 ER_IDNF = 0x10, /**< ID Not Found */ 127 ER_MCR = 0x08, /**< Media Change Request */ 128 ER_ABRT = 0x04, /**< Aborted Command */ 129 ER_TK0NF = 0x02, /**< Track 0 Not Found */ 130 ER_AMNF = 0x01 /**< Address Mark Not Found */ 131 }; 132 133 enum ata_command { 134 CMD_READ_SECTORS = 0x20, 135 CMD_READ_SECTORS_EXT = 0x24, 136 CMD_WRITE_SECTORS = 0x30, 137 CMD_WRITE_SECTORS_EXT = 0x34, 138 CMD_IDENTIFY_DRIVE = 0xEC 139 }; 42 /** Base addresses for ATA I/O blocks. */ 43 typedef struct { 44 uintptr_t cmd; /**< Command block base address. */ 45 uintptr_t ctl; /**< Control block base address. */ 46 } ata_base_t; 140 47 141 48 /** Timeout definitions. Unit is 10 ms. */ … … 144 51 TIMEOUT_BSY = 100, /* 1 s */ 145 52 TIMEOUT_DRDY = 1000 /* 10 s */ 146 };147 148 /** Data returned from @c identify command. */149 typedef struct {150 uint16_t gen_conf;151 uint16_t cylinders;152 uint16_t _res2;153 uint16_t heads;154 uint16_t _vs4;155 uint16_t _vs5;156 uint16_t sectors;157 uint16_t _vs7;158 uint16_t _vs8;159 uint16_t _vs9;160 161 uint16_t serial_number[10];162 uint16_t _vs20;163 uint16_t _vs21;164 uint16_t vs_bytes;165 uint16_t firmware_rev[4];166 uint16_t model_name[20];167 168 uint16_t max_rw_multiple;169 uint16_t _res48;170 uint16_t caps;171 uint16_t _res50;172 uint16_t pio_timing;173 uint16_t dma_timing;174 175 uint16_t validity;176 uint16_t cur_cyl;177 uint16_t cur_heads;178 uint16_t cur_sectors;179 uint16_t cur_capacity0;180 uint16_t cur_capacity1;181 uint16_t mss;182 uint16_t total_lba28_0;183 uint16_t total_lba28_1;184 uint16_t sw_dma;185 uint16_t mw_dma;186 uint16_t pio_modes;187 uint16_t min_mw_dma_cycle;188 uint16_t rec_mw_dma_cycle;189 uint16_t min_raw_pio_cycle;190 uint16_t min_iordy_pio_cycle;191 192 uint16_t _res69;193 uint16_t _res70;194 uint16_t _res71;195 uint16_t _res72;196 uint16_t _res73;197 uint16_t _res74;198 199 uint16_t queue_depth;200 uint16_t _res76[1 + 79 - 76];201 uint16_t version_maj;202 uint16_t version_min;203 uint16_t cmd_set0;204 uint16_t cmd_set1;205 uint16_t csf_sup_ext;206 uint16_t csf_enabled0;207 uint16_t csf_enabled1;208 uint16_t csf_default;209 uint16_t udma;210 211 uint16_t _res89[1 + 99 - 89];212 213 /* Total number of blocks in LBA-48 addressing */214 uint16_t total_lba48_0;215 uint16_t total_lba48_1;216 uint16_t total_lba48_2;217 uint16_t total_lba48_3;218 219 /* Note: more fields are defined in ATA/ATAPI-7 */220 uint16_t _res104[1 + 127 - 104];221 uint16_t _vs128[1 + 159 - 128];222 uint16_t _res160[1 + 255 - 160];223 } identify_data_t;224 225 enum ata_caps {226 cap_iordy = 0x0800,227 cap_iordy_cbd = 0x0400,228 cap_lba = 0x0200,229 cap_dma = 0x0100230 };231 232 /** Bits of @c identify_data_t.cmd_set1 */233 enum ata_cs1 {234 cs1_addr48 = 0x0400 /**< 48-bit address feature set */235 53 }; 236 54 … … 269 87 } block_coord_t; 270 88 89 /** ATA device state structure. */ 271 90 typedef struct { 272 91 bool present;
Note:
See TracChangeset
for help on using the changeset viewer.