Changeset d3dd96e in mainline for uspace/drv/bus/usb/ehci/res.c

Timestamp:

2013-12-30T02:10:18Z (11 years ago)

Author:

Jan Vesely <jano.vesely@…>

Branches:

lfn, master, serial, ticket/834-toolchain-update, topic/msim-upgrade, topic/simplify-dev-export

Children:

f5bfd98

Parents:

2fd16b93

Message:

ehci: Use register layout structures instead of arbitrary offsets

File:

• uspace/drv/bus/usb/ehci/res.c (modified) (5 diffs)

uspace/drv/bus/usb/ehci/res.c

@@ -46 +46 @@
 
 #include "res.h"
-
-#define HCC_PARAMS_OFFSET 0x8
-#define HCC_PARAMS_EECP_MASK 0xff
-#define HCC_PARAMS_EECP_OFFSET 8
-
-#define CMD_OFFSET 0x0
-#define STS_OFFSET 0x4
-#define INT_OFFSET 0x8
-#define CFG_OFFSET 0x40
-
-#define USBCMD_RUN 1
-#define USBSTS_HALTED (1 << 12)
+#include "ehci_regs.h"
 
 #define USBLEGSUP_OFFSET 0
@@ -189 +178 @@
         usb_log_debug2("Registers mapped at: %p.\n", regs);
 
-        const uint32_t hcc_params =
-            *(uint32_t*)(regs + HCC_PARAMS_OFFSET);
+        ehci_caps_regs_t *ehci_caps = regs;
+
+        const uint32_t hcc_params = EHCI_RD(ehci_caps->hccparams);
         usb_log_debug("Value of hcc params register: %x.\n", hcc_params);
 
@@ -196 +186 @@
          * position of EEC registers (points to PCI config space) */
         const uint32_t eecp =
-            (hcc_params >> HCC_PARAMS_EECP_OFFSET) & HCC_PARAMS_EECP_MASK;
+            (hcc_params >> EHCI_CAPS_HCC_EECP_SHIFT) & EHCI_CAPS_HCC_EECP_MASK;
         usb_log_debug("Value of EECP: %x.\n", eecp);
 
@@ -212 +202 @@
 
         /* Get size of capability registers in memory space. */
-        const unsigned operation_offset = *(uint8_t*)regs;
+        const unsigned operation_offset = EHCI_RD8(ehci_caps->caplength);
         usb_log_debug("USBCMD offset: %d.\n", operation_offset);
 
-        /* Zero USBCMD register. */
-        volatile uint32_t *usbcmd =
-            (uint32_t*)((uint8_t*)regs + operation_offset + CMD_OFFSET);
-        volatile uint32_t *usbsts =
-            (uint32_t*)((uint8_t*)regs + operation_offset + STS_OFFSET);
-        volatile uint32_t *usbconf =
-            (uint32_t*)((uint8_t*)regs + operation_offset + CFG_OFFSET);
-        volatile uint32_t *usbint =
-            (uint32_t*)((uint8_t*)regs + operation_offset + INT_OFFSET);
-        usb_log_debug("USBCMD value: %x.\n", *usbcmd);
-        if (*usbcmd & USBCMD_RUN) {
-                *usbsts = 0x3f; /* ack all interrupts */
-                *usbint = 0; /* disable all interrupts */
-                *usbconf = 0; /* release control of RH ports */
-
-                *usbcmd = 0;
+        ehci_regs_t *ehci_regs = regs + operation_offset;
+
+        usb_log_debug("USBCMD value: %x.\n", EHCI_RD(ehci_regs->usbcmd));
+        if (EHCI_RD(ehci_regs->usbcmd) & USB_CMD_RUN_FLAG) {
+                EHCI_WR(ehci_regs->usbintr, 0); /* disable all interrupts */
+                EHCI_WR(ehci_regs->usbsts, 0x3f); /* ack all interrupts */
+                EHCI_WR(ehci_regs->configflag, 0); /* release RH ports */
+                EHCI_WR(ehci_regs->usbcmd, 0);
                 /* Wait until hc is halted */
-                while ((*usbsts & USBSTS_HALTED) == 0);
+                while ((EHCI_RD(ehci_regs->usbsts) & USB_STS_HC_HALTED_FLAG) == 0);
                 usb_log_info("EHCI turned off.\n");
         } else {
@@ -242 +224 @@
             "\t USBINT(%p): %x(0x0 = no interrupts).\n"
             "\t CONFIG(%p): %x(0x0 = ports controlled by companion hc).\n",
-            usbcmd, *usbcmd, usbsts, *usbsts, usbint, *usbint, usbconf,*usbconf);
+            &ehci_regs->usbcmd, EHCI_RD(ehci_regs->usbcmd),
+            &ehci_regs->usbsts, EHCI_RD(ehci_regs->usbsts),
+            &ehci_regs->usbintr, EHCI_RD(ehci_regs->usbintr),
+            &ehci_regs->configflag, EHCI_RD(ehci_regs->configflag));
 
         return ret;